Skip to content

fucktopus 3d models

Author: vankoff
Source: grabcad
Author: cargoa8
Source: thingiverse
New FucktopusNew Fucktopus
Author: spotvin
Source: thingiverse
Human fucktopusHuman fucktopus
Author: masapod2892
Source: thingiverse
Author: rollercoasterkid
Source: thingiverse
Author: asmith987
Source: thingiverse
Show more 3d models >>>
3D printing has opened up a world of possibilities for creators and enthusiasts alike, allowing the imagination to run wild with designs that range from the practical to the purely whimsical. Among the myriad of creations that have captured the attention of the 3D printing community, “Fucktopus” 3D models stand out for their unique blend of humor and design complexity. These models, which depict an octopus with a distinctively cheeky attitude, have become somewhat of a cult favorite for their playful defiance and intricate details.

Understanding Fucktopus 3D Models

Fucktopus 3D models are more than just novelty items; they are a testament to the creative freedom that 3D printing offers. The design typically features an octopus in a dynamic pose, with one of its tentacles often humorously raised in a gesture that mimics a well-known rude hand signal. This blend of marine biology and human expression makes for a model that is both amusing and challenging to print.

When searching for these models, platforms like STLFinder become invaluable resources. STLFinder aggregates 3D models from various repositories, giving users access to a wide array of designs, including the many variations of Fucktopus. Each model can vary in pose, complexity, and detail, allowing printers of all skill levels to find a version that suits their capabilities and preferences.

Tips for 3D Printing Fucktopus Models

Printing a Fucktopus model can be both fun and challenging. Here are some tips to ensure a successful print:

  • Layer Height and Detail: Due to the intricate details of Fucktopus models, especially around the tentacles and facial features, opting for a lower layer height can enhance the final print’s detail. A layer height of 0.1mm to 0.15mm is recommended for capturing the nuances of the design.
  • Supports: Given the overhangs and complex shapes, particularly with the raised tentacle, using supports is crucial. Plan your support placement carefully to ensure they are effective yet easy to remove, minimizing post-processing work.
  • Material Choice: Flexible materials like TPU can add an interesting dimension to your Fucktopus, giving it a more lifelike, squishy feel. However, printing with flexible materials can be more challenging, so ensure your printer is properly calibrated and capable of handling such materials.
  • Print Orientation: The orientation of your Fucktopus on the print bed can significantly impact the quality and ease of printing. Experiment with different orientations to find the balance between minimal supports and optimal surface quality.


Q: What is the best material for printing a Fucktopus?
A: PLA is a good starting point for its ease of use and detail fidelity. For a more authentic feel, consider experimenting with TPU for flexibility.

Q: How do I remove supports without damaging the model?
A: Use a combination of flush cutters and tweezers to gently remove the supports. For tough-to-reach places, a craft knife or a heat gun (used cautiously) can help in softening and removing supports.

Q: Can Fucktopus models be scaled?
A: Absolutely! Scaling the model in your slicing software can lead to a larger or smaller print, but be mindful of how scaling might affect the printability, especially the finer details and overhangs.

Q: Are Fucktopus models suitable for beginners?
A: While some Fucktopus models can be complex due to their detailed features and the need for supports, there are simpler versions available that are well-suited for beginners. Start with a basic model and progress to more complex ones as you gain confidence and experience.

Engaging with 3D printing through projects like the Fucktopus models not only enhances technical skills but also fosters a sense of community and shared humor. Each model, with its defiant stance and intricate design, serves as a conversation starter and a testament to the playful side of 3D printing. Whether you’re a seasoned printer or just starting, the journey of bringing a Fucktopus to life is sure to add an element of joy and challenge to your 3D printing endeavors.